Force Test Stand - Motorized & Manual

Force Test Stand - Motorized & Manual

  • On Sale
    Mark-10 ESM303 | Test stand, motorized, vertical, 300 lbF / 1.5 kN
    Add to Cart

    Mark-10 ESM303 | Test stand, motorized, vertical, 300 lbF / 1.5 kN

    Mark-10

    Now: $2,750.25
    Was: $2,895.00
    Mark-10 ESM303 Test stand, motorized, vertical, 300 lbF / 1.5 kN The ESM303 is a highly configurable single-column force tester for tension and compression measurement applications up to 300 lbF [1.5 kN], with a rugged design suitable for laboratory...
    Now: $2,750.25
    Was: $2,895.00
    Add to Cart
  • On Sale
    Mark-10 ES20 | Test stand, hand wheel-operated, 100 lbF / 500 N Mark-10 ES20 | Test stand, hand wheel-operated, 100 lbF / 500 N
    Add to Cart

    Mark-10 ES20 | Test stand, hand wheel-operated, 100 lbF / 500 N

    Mark-10

    Now: $565.25
    Was: $595.00
    Mark-10 ES20 Test Stand, Hand Wheel Operated, 100 Lb The ES10 and ES20 manual test stands are compact and economical solutions for compression and tensile testing of small samples. Choose between a lever (ES10) for quick-action testing or a hand wheel...
    Now: $565.25
    Was: $595.00
    Add to Cart
  • On Sale
    Mark-10 AFCOMP | Complete options package for ESM303
    Add to Cart

    Mark-10 AFCOMP | Complete options package for ESM303

    Mark-10

    Now: $3,467.50
    Was: $3,650.00
    Mark-10 AFCOMP Complete Motorized 110V Test Stand, All OptionsThe ESM303 is a highly configurable single-column force tester for tension and compression measurement applications up to 300 lbF [1.5 kN], with a rugged design suitable for laboratory and...
    Now: $3,467.50
    Was: $3,650.00
    Add to Cart
  • On Sale
    Mark-10 AFCOMP-H | Complete options package for ESM303H Mark-10 AFCOMP-H | Complete options package for ESM303H
    Add to Cart

    Mark-10 AFCOMP-H | Complete options package for ESM303H

    Mark-10

    Now: $3,467.50
    Was: $3,650.00
    Mark 10 AFCOMP-HESM303H Test Stand with all options The ESM303H is a highly configurable horizontal force tester for tension and compression measurement applications up to 300 lbF [1.5 kN], with a rugged design suitable for laboratory and production...
    Now: $3,467.50
    Was: $3,650.00
    Add to Cart
  • On Sale
    Add to Cart

    Mark-10 AF008 | FollowMeTM force-based manual positioning

    Mark-10

    Now: $237.50
    Was: $250.00
    Mark 10 AF008FollowMe™ option Crosshead movement responds to manually pushing or pulling on the load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning. Requirements To Use AF008: Model M7i or M5i indicator ...
    Now: $237.50
    Was: $250.00
    Add to Cart
  • On Sale
    Add to Cart

    Mark-10 AF009 | Travel indication with USB output

    Mark-10

    Now: $902.50
    Was: $950.00
    Mark 10 AF009Travel measurement option Travel is indicated on the control unit display, with output via USB. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs...
    Now: $902.50
    Was: $950.00
    Add to Cart
  • On Sale
    Add to Cart

    Mark-10 AF010 | Computer control via USB

    Mark-10

    Now: $902.50
    Was: $950.00
    Mark 10 AF010PC control option The ESM303H may be fully controlled by a PC through a program written in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software (not available...
    Now: $902.50
    Was: $950.00
    Add to Cart
  • On Sale
    Add to Cart

    Mark-10 AF011 | Programmable travel set points

    Mark-10

    Now: $237.50
    Was: $250.00
    Mark 10 AF011Travel limits option The stand stops at or cycles between programmable right and left travel distances. Requirements To Use AF011: If data output to a PC is required, add 09-1252 and 09-1158 cables, and a Model M7i or M5i indicator. ...
    Now: $237.50
    Was: $250.00
    Add to Cart
  • On Sale
    Add to Cart

    Mark-10 AF012 | Integrated overload protection

    Mark-10

    Now: $237.50
    Was: $250.00
    Mark 10 AF012Overload protection option Protects a load cell against overload. Program the desired percentage of full scale of the load cell. Adjustable analog voltage setting allows the stand to interface with virtually any instrument with analog...
    Now: $237.50
    Was: $250.00
    Add to Cart
  • On Sale
    Add to Cart

    Mark-10 AF013 | Auto return

    Mark-10

    Now: $166.25
    Was: $175.00
    Mark 10 AF013Auto return option The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit. Requirements To Use AF013: If reversing at force set point:...
    Now: $166.25
    Was: $175.00
    Add to Cart
  • On Sale
    Add to Cart

    Mark-10 AF014 | Cycling / dwell time

    Mark-10

    Now: $237.50
    Was: $250.00
    Mark 10 AF014Cycling / dwell time option Same as auto return, but with the ability to program up to 100,000 cycles. Programmable dwell time for right and left limits (set independently) can be set up for up to 10,000 seconds. Requirements To Use...
    Now: $237.50
    Was: $250.00
    Add to Cart
  • On Sale
    Add to Cart

    Mark-10 AF019 | Break detection

    Mark-10

    Now: $166.25
    Was: $175.00
    Mark 10 AF019Break detection option Crosshead stops at a sudden drop in force. Programmable percentage of peak force. Requirements To Use AF019: Model M7i or M5i indicator 09-1252 interface cable
    Now: $166.25
    Was: $175.00
    Add to Cart
  • On Sale
    Add to Cart

    Mark-10 AF020 | Load holding

    Mark-10

    Now: $380.00
    Was: $400.00
    Mark 10 AF020Load holding option Dynamically adjusts the crosshead position to maintain a programmed load for an indefinite or specified period of time. Requirements To Use AF020: Model M7i or M5i indicator If a specified time is required, add...
    Now: $380.00
    Was: $400.00
    Add to Cart
  • On Sale
    Add to Cart

    Mark-10 AF021 | Preload / sample touch

    Mark-10

    Now: $237.50
    Was: $250.00
    Mark 10 AF021Preload option Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, compression, spring, elongation, and other applications. Preload is programmable as a percentage of force gauge/load cell full...
    Now: $237.50
    Was: $250.00
    Add to Cart
  • On Sale
    Add to Cart

    Mark-10 AF022 | Profiles

    Mark-10

    Now: $475.00
    Was: $500.00
    Mark 10 AF022Profiles option Save and recall sets of test parameters, such as speeds, travel limits, preloads, etc. Up to 50 profiles may be stored.
    Now: $475.00
    Was: $500.00
    Add to Cart
  • On Sale
    Mark-10 ES05 | Test stand, lever-operated, 30 lbF / 150 N Mark-10 ES05 | Test stand, lever-operated, 30 lbF / 150 N
    Add to Cart

    Mark-10 ES05 | Test stand, lever-operated, 30 lbF / 150 N

    Mark-10

    Now: $460.75
    Was: $485.00
    Mark-10 ES05 Test Stand, Lever-Operated, Compression, 30 LbThe new compact ES05 test stand is designed for compression testing of up to 30 lb (150 N). Typical applications include switch contact activation testing, small spring testing, peel testing, and...
    Now: $460.75
    Was: $485.00
    Add to Cart