Atlas Copco 8431 0368 21 | EP6PS HR10, ErgoPulse non shut-off Pulse Tool, 22 ft lbs Max Torque

8431 0368 21
Request a Quote!
Technical Specifications
Min Torque - Ft Lbs1
Max Torque - Ft Lbs22
Max Torque - In Lbs266
Min Torque - Nm1
Max Torque - Nm30
Clutch TypeNon Shut Off
Drive Size3/8'' square
Free Speed - rpm8000
Length - mm150
Air Inlet1/4''
Stock CodeC


Atlas Copco 8431 0368 21

Ep6Ps Hr10, Ergopulse Non Shut-Off Pulse Tool, 22 Ft Lbs Max Torque

ErgoPulse PTS is a reliable and powerful workhorse and offers the same shut-off mechanism as the peak performer PTX. All PTS models can also be used as lubrication free, just like other ErgoPulse tools.

  • TRIM valve – A patented adjustable valve at the air outlet is used to maximize tool accuracy on one type of joint, which could be hard, medium or soft.
  • High reliability.
  • Consistent torque over time, low meanshift.
  • High level of durability.
  • High speed, short cycle times.
  • One-handed operation.
  • High power-to-weight ratio.
  • No springs to wear out.
  • No wear on key parts.
  • High precision components.
  • No reaction forces.
  • Light, well-balanced tools.
  • Low noise levels.
  • Lubrication free.

(a) To be used as a guide only, final torque depends on type of joint, accessories used and air pressure.
(b) Female hexagon drive. Quick change chuck.
(c) Torque is adjusted by regulating the air pressure.

View AllClose