Atlas Copco 8434 1080 00 | LMS08 HR10 | Pistol Grip, Non-Shut Off, Impact Wrench, 5-33 ft lb

Get your tool under our Flex Warranty!

We will fix it or replace it.

FLEX Warranty keeps your tools safe when manufacturer warranties come up short. Bad luck deserves good coverage.

*Manufacturer warranty only cover you for so long. FLEX Warranty extends and enhances your coverage for up to two years.

Atlas Copco 8434 1080 00 | LMS08 HR10 | Pistol Grip, Non-Shut Off, Impact Wrench, 5-33 ft lb

Call for Price
QuantityPrice
Atlas Copco

Details

Atlas Copco 8434 1080 00

Pistol Grip, Non-Shut Off, Impact Wrench, 5-33 Ft Lb


Atlas Copco impact wrenches are designed to provide dependability and a long, trouble-free service life in the toughest conditions. Few other tools can match the Atlas Copco impact wrench when it comes to flexibility, capacity-to-weight ratio and simplicity in use and maintenance. The LMS models are non shut-off, which means they will shut off once the operator releases the trigger.

Features:
  • Fast tightening and disassembly
  • Negligible reaction force
  • Low weight
  • High power-to-weight ratio
  • Tightening time should not exceed 5 seconds, to avoid excess wear on the tool
  • Soft-start throttle
  • GRS, Grease Retaining System

The LMS is a non shut-off impact wrench with extraordinary power to weight qualities and virtually no reaction force during tightening

Warning: California Proposition 65

Get your tool under our Flex Warranty!

We will fix it or replace it.

FLEX Warranty keeps your tools safe when manufacturer warranties come up short. Bad luck deserves good coverage.

*Manufacturer warranty only cover you for so long. FLEX Warranty extends and enhances your coverage for up to two years.

Features & Benefits

  • Fast tightening and disassembly
  • Negligible reaction force
  • Long service intervals
  • High power-to-weight ratio.

Technical Information

Technical Specifications

Technical Specifications

SKU: 8434 1080 00
Manufacturer Atlas Copco
Model LMS08 HR10
Stock CodeC
Actuation Trigger
Air Inlet 1/4 in.
Blows Per Minute (bpm) 1650
Bolt Size - mm 6-8
Drive size 3/8'' square
Free Speed (RPM) 14000
Impacts Per Minute 1650
Length (mm) 185
Max Air Consumption (cfm) 5
Max Free Speed (rpm) 14000
Min Hose Size (mm) 6.3
Retainer Type Pin
Series LMS
Torque Range (Ft Lbs) 5 - 48
Torque Range (Nm) 7 - 65
Weight2 lbs

We strive to provide as much technical information as possible. If you need more tech data, let us know!

Technical Documents

We are always wanting to provide more information! In need of a technical document? Let us know!

Videos & Media

Reviews