Atlas Copco 8434 1680 02 | LMS68 GOR25 | Inline Impact Wrench, 600 - 4450 Nm, 5000 rpm, 1'' square

Get your tool under our Flex Warranty!

We will fix it or replace it.

FLEX Warranty keeps your tools safe when manufacturer warranties come up short. Bad luck deserves good coverage.

*Manufacturer warranty only cover you for so long. FLEX Warranty extends and enhances your coverage for up to two years.

Atlas Copco 8434 1680 02 | LMS68 GOR25 | Inline Impact Wrench, 600 - 4450 Nm, 5000 rpm, 1'' square

Call for Price
QuantityPrice
Atlas Copco

Details

Atlas Copco 8434 1680 02

Straight, Non-Shut Off, Impact Wrench, 442-1400 Ft Lb


Atlas Copco impact wrenches are designed to provide dependability and a long, trouble-free service life in the toughest conditions. Few other tools can match the Atlas Copco impact wrench when it comes to flexibility, capacity-to-weight ratio and simplicity in use and maintenance. The LMS models are non shut-off, which means they will shut off once the operator releases the trigger.

Features:
  • Fast tightening and disassembly
  • Negligible reaction force
  • Low weight
  • High power-to-weight ratio
  • Tightening time should not exceed 5 seconds, to avoid excess wear on the tool
  • Soft-start throttle
  • GRS, Grease Retaining System

Designed to provide dependability and a long, trouble-free service life in the toughest conditions. The LMS is a non shut-off impact wrench with extraordinary power to weight qualities and virtually no reaction force during tightening, typically used where fast tightening or disassembly is needed.

Warning: California Proposition 65

Get your tool under our Flex Warranty!

We will fix it or replace it.

FLEX Warranty keeps your tools safe when manufacturer warranties come up short. Bad luck deserves good coverage.

*Manufacturer warranty only cover you for so long. FLEX Warranty extends and enhances your coverage for up to two years.

Features & Benefits

  • Extremely fast tightening and loosening
  • Longer service life
  • Greater operator comfort
  • Reduced risk of vibration related injuries

Technical Information

Technical Specifications

Technical Specifications

SKU: 8434 1680 02
Manufacturer Atlas Copco
Model LMS68 GOR25
Stock CodeC
Actuation Outside Trigger
Blows Per Minute (bpm) 780
Bolt Size - mm 22-30
Drive size 1'' square
Free Speed (RPM) 5000
Impacts Per Minute 780
Length (mm) 339
Max Air Consumption (cfm) 58.9
Max Free Speed (rpm) 5000
Min Hose Size (mm) 16
Retainer Type Thru-hole
Series LMS
Torque Range (Ft Lbs) 442 - 3282
Torque Range (Nm) 600 - 4450
Weight21.1 lbs

We strive to provide as much technical information as possible. If you need more tech data, let us know!

Technical Documents

We are always wanting to provide more information! In need of a technical document? Let us know!

Videos & Media

Reviews