JBC JBC RMVE Rework Station

Details

The quickest and safest solution for soldering and rework, also using Hot Air.

It consists of stackable modules and all the necessary accessories to make your job easier.

It works with the JBC exclusive heating system and the intelligent sleep & hibernation modes.

It features all the Excellence range benefits and the JT-SD Stand that guarantees the Auto-stop function when the heater is at rest.

The RMVE works simultaneously with the DR560 Desoldering Iron, the T245 Handle and the JT-TA Heater Hose Set and is compatible with most JBC tools.

Required compressed air at the operator´s bench.

Spefications vary by setup:

Weight and Dimensions	See individual modules
Voltage	120 V / 230 V / 100 V
Input Fuse	DDE: 4A/ 2A/ 5A JT: 8A/ 4A/ 8A
Output Peak Power	DDE: 150 W per tool
Nominal Power	JT: 700 W
Temperature selection	JT: 150-450ºC (300-840ºF) or Cool mode: Temp Off DDE: 90-450 ºC (190-840 ºF)
Idle Temp. Stability (still air)	DDE: ± 1.5 ºC (± 3 ºF)
Ambient operating temp.	10-40 ºC (50-104 ºF)
Air Flow Regulation	DDE: 10-50 SLPM
Flow rate	MSE: 15 SLPM
Vacuum	JT: 30% / 228 mmHg / 9 inHg
Vacuum (at 6 bar)	MVE: 90%/680 mmHg/26.8 inHg
Rated current	JT: 6A/ 3A / 7A
Tip to ground resistance	DDE:<2 ohms
Tip to ground voltage	DDE:<2 mV RMS
Communication connectors	JT: USB-B DDE: USB-A/USB-B/Peripherals
Robot connector	DDE: RJ12 for RS-232 protocol
Pedal connection	JT and MSE: P-005 Pedal