Atlas Copco 8434 1580 01 | LMS58 HR20 | Impact Wrench, 300 - 800 Nm, 5500 rpm, 3/4'' square

Get your tool under our Flex Warranty!

We will fix it or replace it.

FLEX Warranty keeps your tools safe when manufacturer warranties come up short. Bad luck deserves good coverage.

*Manufacturer warranty only cover you for so long. FLEX Warranty extends and enhances your coverage for up to two years.

Atlas Copco 8434 1580 01 | LMS58 HR20 | Impact Wrench, 300 - 800 Nm, 5500 rpm, 3/4'' square

Rating:
(0)No Reviews yet
Call for Price
Atlas Copco

Details

Atlas Copco 8434 1580 01

Pistol Grip, Non-Shut Off, Impact Wrench, 221-590 Ft Lb


Atlas Copco impact wrenches are designed to provide dependability and a long, trouble-free service life in the toughest conditions. Few other tools can match the Atlas Copco impact wrench when it comes to flexibility, capacity-to-weight ratio and simplicity in use and maintenance. The LMS models are non shut-off, which means they will shut off once the operator releases the trigger.

Features:
  • Fast tightening and disassembly
  • Negligible reaction force
  • Low weight
  • High power-to-weight ratio
  • Tightening time should not exceed 5 seconds, to avoid excess wear on the tool
  • Soft-start throttle
  • GRS, Grease Retaining System

Designed to provide dependability and a long, trouble-free service life in the toughest conditions. The LMS is a non shut-off impact wrench with extraordinary power to weight qualities and virtually no reaction force during tightening, typically used where fast tightening or disassembly is needed.

Get your tool under our Flex Warranty!

We will fix it or replace it.

FLEX Warranty keeps your tools safe when manufacturer warranties come up short. Bad luck deserves good coverage.

*Manufacturer warranty only cover you for so long. FLEX Warranty extends and enhances your coverage for up to two years.

Features & Benefits

  • Extremely fast tightening and loosening
  • Longer service life
  • Greater operator comfort
  • Reduced risk of vibration related injuries

Technical Information

Technical Specifications

Technical Specifications

SKU: 8434 1580 01
Manufacturer Atlas Copco
Model LMS58 HR20
Stock CodeC
Actuation Trigger
Air Inlet 3/8 in.
Blows Per Minute (bpm) 900
Bolt Size - mm 18-20
Drive size 3/4'' square
Free Speed (RPM) 5500
Impacts Per Minute 900
Length (mm) 210
Max Air Consumption (cfm) 30.5
Max Free Speed (rpm) 5500
Min Hose Size (mm) 12.5
Retainer Type Thru-hole
Series LMS
Torque Range (Ft Lbs) 221 - 1401
Torque Range (Nm) 300 - 1900
Weight10.6 lbs

We strive to provide as much technical information as possible. If you need more tech data, let us know!

Technical Documents

We are always wanting to provide more information! In need of a technical document? Let us know!

Videos & Media

Reviews

No reviews available

Be the first to
Write a Review