ETO ST61-55-21-LO3 | 8.1-40.5 ft lbs

Atlas Copco 8433 2310 93

Eto St61-55-21-Lo3, Eto St61 Offset Tube Nut Nutrunner, 8.1-40.5 Ft Lbs

Atlas Copco's unique Tensor motors give the Tensor range outstanding spindle speeds and, thus, help you achieve lower cycle times in your operation. Exceptional ergonomics in terms of balance, grip and low weight make the tools a favorite of the operators and increase individual productivity. All Tensor tools are equipped with LEDÂ’s that will indicate the tightening result, green light for tightening OK and red light for NOK. At Atlas Copco we believe that quality is the road to lowest cost of operation over time. A maintained Tensor tool produces the same performance year after year at minimum and predictable costs while ensuring highest possible uptime. The second generation of Tensor tools, Tensor ST, also focusing on safety critical applications, was developed with low weight and productivity in mind. Accessing tube nuts in deep narrow spaces requires an in-line tool. The in-line attachments are fitted to the tool body in place of the angle head. This results in a smooth assembly tool for tube nut applications. The gears are surrounded by two halves, which even out the forces from the gear train and provide greater accuracy and durability. Tests and real applications show an unrivaled durability for these tube nut attachments.

Features:

• High speed nutrunner reduces tightening cycle times, thus increasing productivity
• Improved ergonomics due its light weight for operator comfort
• Internal bus connection for intelligent accessories, such as a barcode reader and torque selector, reducing time on unnecessary operator movements to read identifiers (e.g.: VIN) or pick up sockets to change program settings
• Configurable LEDÂ’s and an integrated speaker for indicating results via audio signals for operator feedback increasing assembly quality
• Every gear head is thoroughly tested and supplied with a test certificate to guarantee constant efficiency.
• The tools and gear heads have no sharp edges, which helps prevent injury to the operator.
• The run-in procedure for every gear head leads to constant efficiency of the gear, which in turn gives very high accuracy.