Norbar Manual Torque Multipliers
Narrow By
5 Products
SKU: Norbar HT3 Manual Series Torque Multipliers
Norbar HT3 Manual Series Torque Multipliers
The 'Highwayman' torque multiplier has been designed for use where it is necessary to provide higher torques than would otherwise be possible due to limitations of space or operator strength. Input to the multiplier is via a ratchet torque wrench set to one fifth of the desired output torque.
- 5:1 mean torque multiplication, accuracy ±4%
- Supplied with two reaction bar styles for maximum versatility
- Robust construction means minimal maintenance and long life
- Supplied in a carry case, the Highwayman is ideal for inclusion in the heavy vehicle tool kit
SKU: Norbar HT4 Manual Series Torque Multipliers
Norbar HT4 Manual Series Torque Multipliers
The 'Highwayman' torque multiplier has been designed for use where it is necessary to provide higher torques than would otherwise be possible due to limitations of space or operator strength. Input to the multiplier is via a ratchet torque wrench set to one fifth of the desired output torque.
- Robust construction means minimal maintenance and long life.
- Mean 15.5:1 (3,000 Nm) or 26:1 (4,500 Nm) torque multiplication, accuracy ±4%
- High ratios allow the use of a small torque wrench
- Supplied in carrying case with replacement square drive
SKU: Norbar Compact Series Manual Torque Multipliers
Norbar Compact Series Manual Torque Multipliers
Norbar Compact Series - Compact dimensions allow excellent access to applications and easy, safe handling
- Guaranteed accuracy of better than +/-4%.
- Light weight for torque capacity.
- Supplied as standard with an aluminium reaction arm.Other options are available on request, including customised reactions
- Robust,48 tooth Anti Wind-Up Ratchet (AWUR) contains the forces generated during tightening for safe and easy operation.
SKU: Norbar Small Diameter Series Torque Multipliers
Norbar Small Diameter Series Manual Torque Multipliers
Norbar Small Diameter Series - HandTorque models HT 30 and 60 have a higher torque output for a given gearbox diameter than the Standard Series
- Reduced diameter allows improved access.
- High torque output – up to 5500 N.m.
- Reversible – Pneutorques can be used for tightening and untightening.
- Reaction foot can slide on the spline to allow for sockets of various lengths.
SKU: Norbar HandTorque Standard Series Torque Multipliers
Norbar HandTorque Standard Series Manual Torque Multipliers
Norbar HandTorque Standard Series - Models to 3400 N.m,Single Speed
- Mean torque multiplication accuracy ±4%
- High ratios allow the use of a small torque wrench, multipliers can be used where access is limited
- Anti Wind-Up Ratchet available on high ratio models
- Other reaction styles can be designed to suit specific applications