2-7/16 in. High Speed Steel Annular Cutter, 2 in. depth

Drillco 2-7/16 in. High Speed Steel Annular Cutter, 2 in. depth

92SE328

2-7/16 in. High Speed Steel Annular Cutter, 2 in. depth by Drillco. Do you see this Annular Cutter available for a much lower price? Contact Customer Service about Price Matching!

Broach cutting using Drillco cutters means you can produce large diameter holes efficiently and quickly with less energy, faster penetration and less thrust. Rather than drilling out the metal with a solid drill, Drillco cutters remove only the periphery of the hole, ejecting a slug at the end of the cut. Tests show that a solid drill will take 3 minutes, 45 seconds to drill a 1-1/4” hole in 3/4” plate. A Drillco cutter can do the same job in 35 seconds. 9200SE series cutters are available prepackaged with corresponding pin on sizes 7/16" - 1-1/2". The Nitro® ranges of Annular Cutters are made from Cobalt, offering even better performance over the standard High Speed Steel ranges. Carbide Tipped Annular Cutters maximize the performance of any Magnetic Drill Machine, delivering reamed-quality, bur free holes in a fraction of the time of standard HSS Annular Cutters. Eliminates the need for costly pilot holes & step drilling. 3/4" shanks are univeral and fit most magnetic drilling machines including those with tool-less arbors and set-screw arbors. Larger diameters and depths on our Carbide Tipped Cutters are available by special order with short lead times. Contact us for details.