Click the image to zoom
Drillco450E002
#2/0 Straight Flute Taper Pin Reamer, 2-9/16 in.
$23.13
Total$23.13Taxes & shipping at checkout
Quantity
1
- Free UPS Ground over $999.99
- Factory-authorised service
450E002 | #2/0 Straight Flute Taper Pin Reamer, 2-9/16 in.450E002
Total$23.13
1
Details
Product information
Overview
Drillco #2/0 Straight Flute Taper Pin Reamer, 2-9/16 in.
450E002
#2/0 Straight Flute Taper Pin Reamer, 2-9/16 in. by Drillco. Do you see this Straight Flute Taper Pin Reamer available for a much lower price? Contact Customer Service about Price Matching!
Taper Pin Reamers are manufactured with a taper of 1/4” per foot. They are used to ream holes into which standard taper pins will fit. The point of each reamer will enter hole reamed by the next smaller size. Hole to be reamed should be a few thousands smaller than the small diameter of the finished reamed hole. Square shank allows hand (straight and spiral flute) reamers to be held in a tap wrench or vise, depending on whether the reamer or the part is rotated.
| Technical Specifications | |
|---|---|
| Material | High Speed Steel |
| Type | Straight Flute Taper Pin Reamer |
| Manufacturer | Drillco |
| Finish | Bright-Black |
| SKU | 450E002 |
| Diameter - mm | 5/32'' |
| Shank | 5/32'' Straight with Square |
| UPC | 045997099521 |
| Shank Type | Straight with Square |
| Overall Length | 2-9/16 in. |
| Flute Length | 1-9/16 in. |
| Bit Size | 2/0 |
| Series | 4500E |
| Diameter - in | 5/32 |
| MPN | 450E002 |