Click the image to zoom
Datasensing95B063611
IS-18-H1-S2 | Inductive Sensor, Ø18 Short - Double Range Non Flush 14Mm - Pnp No - 2M M12
The inductive proximity sensors belonging to the line Stainless Steel were made in sturdy cylindrical housing made of stainless steel, with diameters ranging from 4 to 30 mm, for use in hygienic environments, as well as in harsh environments subjected to frequent wash down thanks to their IP67 protection degree. Versions are available with outputs cable or with M8 or M12 standard industrial connectors.
$19.09List $32.54
Save $13.45Total$19.09Taxes & shipping at checkout
Quantity
1
- Free UPS Ground over $999.99
- Factory-authorised service
95B063611 | IS-18-H1-S2 | Inductive Sensor, Ø18 Short - Double Range Non Flush 14Mm - Pnp No - 2M M12IS-18-H1-S2
Total$19.09
1
Details
Product information
Overview
Datalogic IS-18-H1-S2, 95B063611
Inductive Sensor,
| Technical Specifications | |
|---|---|
| Nominal Sensing Distance | 14 mm |
| Operating Distance | 0 - 11.34 mm |
| Standard Target | 42x42 mm FE360 |
| Correction Factor | Copper: 0.4-0.5, Aluminium: 0.4-0.6, Brass: 0.5-0.7, Stainless Steel: 0.7-1.05 |
| Repeat Accuracy | < 3% (at 24V UB, 23°C 5°C) |
| Hysteresis | < 10% |
| Application Description | M18 short case non-flush mount |
| Function | Proximity |
| Output Type | PNP |
| Output Function | NO (Normally Open) |
| Switching Frequency | 400 Hz |
| Response Time | 1.25 ms |
| Operating Voltage | 10 - 30 Vdc |
| No-Load Supply Current | 10 mA |
| Load Current | 200 mA |
| Output Voltage Drop | 1.2 V @ 100mA |
| Maximum Ripple Content | 10% |
| LED Indicators | Yellow LED (Output State) |
| Time Delay Before Availability | 75 ms |
| Short-Circuit Protection | Yes |
| Reverse Polarity Protection | Yes |
| Inductive Load Protection | Yes |
| Emission Frequency | ‰¥ 100 kHz |
| Mounting | Unshielded (Non-flush) |
| Dimensions | Ø18 x 65 mm |
| Housing Material | Nickel-plated brass |
| Connection | M12 Plug |
| Active Head Material | LCP |
| Tightening Torque | 20 Nm |
| Diameter | M18 |
| Approvals | CE, cULus, ECOLAB, DIVERSEY |
| Supplied Accessories | 2 nuts M18x1 |
| Operating Temperature | -25°C to +60°C |
| Mechanical Protection | IP67 |
| MPN | IS-18-H1-S2 |