Click the image to zoom
Datasensing95B062631
IS-30-D1-S2 | Inductive Sensor, Ø130Short - Non Flush 15Mm - Pnp No - M12
The inductive proximity sensors belonging to the line Stainless Steel were made in sturdy cylindrical housing made of stainless steel, with diameters ranging from 4 to 30 mm, for use in hygienic environments, as well as in harsh environments subjected to frequent wash down thanks to their IP67 protection degree. Versions are available with outputs cable or with M8 or M12 standard industrial connectors.
$27.37List $46.66
Save $19.29Total$27.37Taxes & shipping at checkout
Quantity
1
- Free UPS Ground over $999.99
- Factory-authorised service
95B062631 | IS-30-D1-S2 | Inductive Sensor, Ø130Short - Non Flush 15Mm - Pnp No - M12IS-30-D1-S2
Total$27.37
1
Details
Product information
Overview
Datalogic IS-30-D1-S2, 95B062631
Inductive Sensor,
| Technical Specifications | |
|---|---|
| Nominal Sensing Distance | 15 mm |
| Operating Distance | 0 - 12.1 mm |
| Standard Target | 45x45mm FE360 |
| Correction Factor Copper | 0.4 - 0.5 |
| Correction Factor Aluminium | 0.4 - 0.6 |
| Correction Factor Brass | 0.5 - 0.7 |
| Correction Factor Stainless Steel | 0.7 - 1.05 |
| Repeat Accuracy | < 3% (UB 24V Ta=23°C 5°C) |
| Hysteresis | < 10% |
| Application Description | M30 short case non-flush mount |
| Functions | Proximity |
| Output Type | PNP |
| Output Function | Normally Open (NO) |
| Switching Frequency | 300 Hz |
| Response Time | 1.7 ms |
| Operating Voltage | 10 - 30 Vdc |
| No-Load Supply Current | 10 mA |
| Load Current | 200 mA |
| Output Voltage Drop | 1.8V @ 100mA |
| Maximum Ripple Content | 10% |
| Indicators | Yellow LED (output state) |
| Time Delay Before Availability | 50 ms |
| Short-Circuit Protection | Yes |
| Reverse Polarity Protection | Yes |
| Emission | ‰¥ 100 kHz |
| Inductive Load Protection | Yes |
| Mounting | Unshielded (Non-flush) |
| Dimensions | Ø30 x 68 mm |
| Housing Material | Nickel-plated brass |
| Connection | M12 Plug |
| Active Head Material | LCP |
| Tightening Torque | 40 Nm |
| Diameter | M30 |
| Approvals | CE, cULus, ECOLAB, DIVERSEY |
| Supplied Accessories | 2 nuts M30x1.5 |
| Operating Temperature | -25°C to +60°C |
| Mechanical Protection | IP67 |
| MPN | IS-30-D1-S2 |