Torque Multiplier

The innovative QX Series Cordless Torque Multiplier will reduce your bolting time and cost, while ensuring repeatable accuracy for all torque-critical joints.

Features & Benefits

• Closed-loop transducer
• +/- 5% torque accuracy
• Brushless Motor

The EvoTorque Battery Tool (EBT) features a new brushless motor, data memory and data transfer capabilities. Norbar has combined this with their respected gearboxes to deliver a range of fast, reliable, accurate torque tools that retain key features from our EvoTorque 2 ranges.

Features & Benefits

• Multiple units of measuremen: Nm, lbf ft and kgf m
• Torque, Torque & Angle and Torque Audit modes
• 3,000 reading memory, time and date stamped
• integrates into third party control systems

The EvoTorque2 is an electronic torque tool designed to accurately apply torque to threaded fasteners. Tools are factory calibrated to ±3% of reading. The unique ‘intelligent joint sensing’ technology continually measures the joint during tightening and when necessary, employs dynamic braking to avoid torque over-shoot due to motor inertia.

Features & Benefits

• Multiple units of measuremen: Nm, lbf ft and kgf m
• Torque, Torque & Angle and Torque Audit modes
• Brushless motor for low maintenance
• IP44 protection against dust and water ingress

Using twin motor technology, the PTM series of PneuTorques is engineered to be amongst the lightest and fastest on the market. For example, the 800 N·m version has a gearbox diameter of just 52 mm, allowing excellent bolt access, and has a maximum free running speed of 224 rpm. Torque control is normally achieved by adjustment of air pressure. An air pressure versus torque graph and a calibration certificate is supplied with each tool.

Features & Benefits

• Efficient air motor
• Exceptionally low vibration levels
• Very quiet operation
• Light weight design

Norbar have combined a new air motor, the result of an extensive design project, with their respected gearboxes to deliver the PTS range of accurate, efficient, quiet Pneumatic Multipliers

Features & Benefits

• Single efficient bi-directional air motor
• Exceptionally low vibration levels
• Very quiet operation
• Light weight design

Designed to multiply the output torque by 10 times of the input torque so the operator can work alone even when a large torque is required. With the cylinder-shaped compact design, it can be used for tightening work in confined spaces.

Features & Benefits

• Torque Range: 90 - 18000 NM
• Torque Range: 900 - 180000 KGF CM
• Accuracy: +/- 5%
• From $1748

A Stanley Proto Torque Multiplier tool helps reduce the effort needed to generate high torque.

Features & Benefits

• Rated Input: 162 - 227 Ft Lbs
• Rated Output: 750 - 2000 Ft Lbs
• From $529

Williams TM Series - Torque Multipliers with Planetary-gear Mechanism

Features & Benefits

• Provides the operator with nut-turning power that requires only a fraction of the force required when using conventional tools
• Input and output rotation is in the same direction
• Reaction bar rotation is opposite to input direction and must rest securely against a rigid object to withstand the generated reaction force
• By removing 4 screws, heads may be easily disassembled for inspection, cleaning and lubrication

The 'Highwayman' torque multiplier has been designed for use where it is necessary to provide higher torques than would otherwise be possible due to limitations of space or operator strength. Input to the multiplier is via a ratchet torque wrench set to one fifth of the desired output torque.

Features & Benefits

• 5:1 mean torque multiplication, accuracy ±4%
• Supplied with two reaction bar styles for maximum versatility
• Robust construction means minimal maintenance and long life
• Supplied in a carry case, the Highwayman is ideal for inclusion in the heavy vehicle tool kit

The 'Highwayman' torque multiplier has been designed for use where it is necessary to provide higher torques than would otherwise be possible due to limitations of space or operator strength. Input to the multiplier is via a ratchet torque wrench set to one fifth of the desired output torque.

Features & Benefits

• Robust construction means minimal maintenance and long life.
• Mean 15.5:1 (3,000 N������m) or 26:1 (4,500 N������m) torque multiplication, accuracy ±4%
• High ratios allow the use of a small torque wrench
• Supplied in carrying case with replacement square drive