Manual Torque Multipliers

The EvoTorque2 is an electronic torque tool designed to accurately apply torque to threaded fasteners. Tools are factory calibrated to ±3% of reading. The unique ‘intelligent joint sensing’ technology continually measures the joint during tightening and when necessary, employs dynamic braking to avoid torque over-shoot due to motor inertia.

Features & Benefits

• Multiple units of measuremen: Nm, lbf ft and kgf m
• Torque, Torque & Angle and Torque Audit modes
• Brushless motor for low maintenance
• IP44 protection against dust and water ingress

The EvoTorque® 2 is an electronic torque tool designed for accurately applying torque to threaded fasteners. Tools are factory calibrated to ±3% of reading.

Features & Benefits

• Operating range from 600 - 7000 Nm
• 110V and 230V versions available
• Indicator on tool clearly signals that the correct Torque or Angle has been achieved
• From $14348

The EvoTorque® 2 is an electronic torque tool designed for accurately applying torque to threaded fasteners. Tools are factory calibrated to ±3% of reading.

Features & Benefits

• Operating range from 100 - 2000 Nm
• Reaction forces are contained by the reaction bar, so forces are not passed back to the operator
• Very low vibration levels using a non-impacting mechanism; this leads to comfortable and safe use with less damage to the tool, socket and threaded assembly
• From $12908

The EvoTorque® 2 is an electronic torque tool designed for accurately applying torque to threaded fasteners. Tools are factory calibrated to ±3% of reading.

Features & Benefits

• Operating range from 270 - 4000 Nm
• 3000 reading memory, time and date stamped
• Complimentary PC software "EvoLog" for data management and tool configuration
• From $13592

The EvoTorque Battery Tool (EBT) features a new brushless motor, data memory and data transfer capabilities. Norbar has combined this with their respected gearboxes to deliver a range of fast, reliable, accurate torque tools that retain key features from our EvoTorque 2 ranges.

Features & Benefits

• Multiple units of measuremen: Nm, lbf ft and kgf m
• Torque, Torque & Angle and Torque Audit modes
• 3,000 reading memory, time and date stamped
• integrates into third party control systems

Based on the original PneuTorque, the 'Standard Series' range is a direct result of over 30 years of refinement and development necessary to keep pace with industry's requirements today.

Features & Benefits

• Operating range from 160 - 300000 Nm
• Forward and reverse operation.
• Low operator fatigue - quiet, non impacting or pulsing.
• From $4445

These PneuTorque models share the same features as the 'Standard' Series, but have a higher torque output for a given gearbox diameter and are fitted with a remote motor. They have no direction/shut-off control but rely on external pneumatic circuitry to provide this function.

Features & Benefits

• Operating range from 160 - 300000 Nm
• Forward and reverse operation.
• Low operator fatigue - quiet, non impacting or pulsing.
• From $10103

Using twin motor technology, the PTM series of PneuTorques is engineered to be amongst the lightest and fastest on the market. For example, the 800 N·m version has a gearbox diameter of just 52 mm, allowing excellent bolt access, and has a maximum free running speed of 224 rpm. Torque control is normally achieved by adjustment of air pressure. An air pressure versus torque graph and a calibration certificate is supplied with each tool.

Features & Benefits

• Efficient air motor
• Exceptionally low vibration levels
• Very quiet operation
• Light weight design

Norbar have combined a new air motor, the result of an extensive design project, with their respected gearboxes to deliver the PTS range of accurate, efficient, quiet Pneumatic Multipliers

Features & Benefits

• Single efficient bi-directional air motor
• Exceptionally low vibration levels
• Very quiet operation
• Light weight design