Norbar Standard Manual Torque Multipliers
Narrow By
26 Products
SKU: 16010-norbar
Norbar 16010 3/4 in. Square 1700 Nm Torque Multiplier, 1/2 in. input, 5:1
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:12%
SKU: 16012.HD-norbar
Norbar 16012.HD 1 in. Square 1700 Nm Heavy Duty Torque Multiplier, 3/4 in. input, 5:1
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:12%
SKU: 16030-norbar
Norbar 16030 1 in. Square 1700 Nm Torque Multiplier, 1/2 in. input, 5:1
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
SKU: 16030.HD-norbar
Norbar 16030.HD 1 in. Square 1700 Nm Heavy Duty Torque Multiplier, 1/2 in. input, 5:2
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
SKU: 16034.HD-norbar
Norbar 16034.HD 1 in. Square 1700 Nm Heavy Duty Torque Multiplier, 1/2 in. input, 25:1
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:12%
SKU: 16088-norbar
Norbar 16088 MULTIPLIER HT2; 25:1 WITH AWUR; 3/4 IN. SQUARE DRIVE
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:12%
SKU: 16089.HD-norbar
Norbar 16089.HD MULTIPLIER HT2 25:1 HEAVY DUTY AWUR
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:12%
SKU: 16014-norbar
Norbar 16014 1 in. Square 3400 Nm Torque Multiplier, 3/4 in. input, Anti Wind-Up, 5:1
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:12%
SKU: 16028-norbar
Norbar 16028 1 in. Square 3400 Nm Torque Multiplier, 1/2 in. input, 25:1
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:12%
SKU: 16090-norbar
Norbar 16090 1 in. Square 3400 Nm Torque Multiplier, 1/2 in. input, Anti Wind-Up, 25:1
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:12%
SKU: 16064.75-norbar
Norbar 16064.75 1 in. Square 3400 Nm Torque Multiplier, 1/2 in. input, 75:1
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:7%
SKU: 16064-norbar
Norbar 16064 1 in. Square 3400 Nm Torque Multiplier, 1/2 in. input, 125:1
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:12%
SKU: 16016-norbar
Norbar 16016 1-1/2 in. Square 3400 Nm Torque Multiplier, 3/4 in. input, 5:1
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:12%
SKU: 16024-norbar
Norbar 16024 1-1/2 in. Square 3400 Nm Torque Multiplier, 3/4 in. input, 25:1
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:12%
SKU: 16092-norbar
Norbar 16092 1-1/2 in. Square 3400 Nm Torque Multiplier, 1/2 in. input, 25:1
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:12%
SKU: 16093-norbar
Norbar 1-1/2 in. Square 3400 Nm Torque Multiplier, 1/2 in. input, Anti Wind-Up, 125:1
Save:12%
SKU: 16067-norbar
Norbar 16067 1-1/2 in. Square 6000 Nm Torque Multiplier, 3/4 in. input, 5:1
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:12%
SKU: 16018-norbar
Norbar 16018 1-1/2 in. Square 6000 Nm Torque Multiplier, 3/4 in. input, 25:1
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:12%
SKU: 16065-norbar
Norbar 16065 1-1/2 in. Square 6000 Nm Torque Multiplier, 1/2 in. input, Anti Wind-Up, 25:1
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:12%
SKU: 16068-norbar
Norbar 16068 1-1/2 in. Square 6000 Nm Torque Multiplier, 1/2 in. input, Anti Wind-Up, 125:1
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:12%
SKU: 16059-norbar
Norbar 16059 1-1/2 in. Square 9000 Nm Torque Multiplier, 3/4 in. input, 25:1
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:12%
SKU: 16070-norbar
Norbar 16070 1-1/2 in. Square 9000 Nm Torque Multiplier, 3/4 in. input, Anti Wind-Up, 25:1
Save:12%
SKU: 16071-norbar
Norbar 16071 1-1/2 in. Square 9000 Nm Torque Multiplier, 1/2 in. input, Anti Wind-Up, 125:1
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:12%
SKU: 16082-norbar
Norbar 16082 2-1/2 in. Square 20000 Nm Torque Multiplier, 3/4 in. input, 25:1
Norbar 'HandTorque' multipliers employ multiple stages of epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. Ratios quoted are always the torque multiplication ratio, not the velocity ratio as given for some competitor's products. For example, the velocity ratio may be 29.8:1 to give a torque multiplication of 25:1 ±4%.
- High ratios allow the use of a small torque wrench,multipliers can be used where access is limited.
- True torque multiplication guaranteed better than ±4%.
Save:12%